+43 4213 30 80 B2B-Shop
Deutsch
-
Cylinder
-
-
Cylinder Norms
ISO 15552 (soon)
ISO 6432 (soon)
ISO 21287 (soon)
-
Use Cases
-
-
Valves
-
Vacuum Technology
-
Air Preparation
-
-
Connectivity
-
-
Distributor
-
-
Assembly & Service
Oval Vacuum Pads
Our oval vacuum suction cups are specifically designed for the secure gripping and handling of long, narrow, or irregularly shaped workpieces. Their oval geometry provides optimal force distribution and high holding force, especially on limited contact surfaces. Available in various sizes, materials, and designs, they are suitable for a wide range of industrial vacuum applications.
There are 11 products.
Material Properties & Temperature Resistance
Each series of suction cups is designed and engineered for different applications. Below is a table to help you determine the ideal suction cup material:
| Material | Temp. (Short time) | Temp. (Long time) | Wear resistance | Oil resistance | Weather and ozone |
| NBR | -20°C to +110°C | -10°C to +80°C | Excellent | Excellent | Good |
| Silicone | -40°C to +200°C | -30°C to +180°C | Unsuitable | Unsuitable | Excellent |
| Polyurethane | +10°C to +50°C | +10°C to +40°C | Excellent | Excellent | Excellent |
| Natural Rubber | -20°C to +80°C | -10°C to +60°C | Excellent | Unsuitable | Fair |
| Hightemp. Silicone | -70°C to +280°C | -50°C to +230°C | Excellent | Excellent | Excellent |
| Fluorine Rubber | -10°C to +230°C | -5°C to +200°C | Excellent | Good | Good |
| EPDM | -30°C to +150°C | -20°C to +120°C | Good | Unsuitable | Excellent |
Shore hardness
When handling workpieces, the material of the vacuum pad is critical for durability, cycle time, and product integrity. The Shore hardness (Shore A for elastomers) determines how "soft" or "hard" the vacuum pad is.
| Shore-Hardness | Property | When should it be used? |
| 30°-40° | Very soft | Irregular, uneven surfaces; delicate products |
| 40°-55° | Soft | Standard applications; balanced ratio |
| 55°-70° | Hard | Smooth surfaces; fast cycles; heavy loads |